Shizam All Fibre Rinse

Shizam All Fibre Rinse is designed for applications where zero residue or the removal of all or as much residue as possible is desired.

This product should be added to the rinse water to remove detergent buildup and to control browning. The use of this product should follow the application of a carpet cleaning prespray

INSTRUCTIONS

For carpet and wet cleanable fabrics/upholstery. Always pre-test in an inconspicuous area. DO NOT mix with any cleaning detergents.

TRUCKMOUNT USE: Mix 1 litre to 20 litres of hot water to make Truckmount concentrate. Set flow meter at 2 GPH

PORTABLE EXTRACTOR: Mix 30ml - 60ml to every 10 litres of water

POST SPRAY: Mix 120ml-180ml to 5 litres of hot water… apply 5 litres of RTU solution to 200 to 500 sq. ft. (Depending on pile density) Vacuum extract and/or rake into carpet for maximum performance.

FOR URINE TREATMENT: Mix 180ml – 240ml to 5 litres of hot water. Saturate carpet at 5 litres per 50 to 100 sq. ft. (Depending on pile density) Allow 15 minutes dwell time then extract. For maximum extraction use a water claw. Use air movers to speed dry the area.

Size: 1 US Gallon - 3.78L